For the first time in human history, researchers have
built a nanolaser that uses only a single molecular layer. This is placed on a thin
silicon beam, which operates at room temperature. The new device, developed by
a team of researchers from Arizona State University and Tsinghua University,
Beijing, China, could potentially be used to send information between different
points on a single computer chip. The lasers also may be useful for other
sensing applications in a compact, integrated format.
"This is the first
demonstration of room-temperature operation of a nanolaser made of the
single-layer material," said Cun-Zheng Ning, an ASU electrical engineering
professor who led the research team. Details of the new laser
are published in the July online edition of Nature Nanotechnology.
In addition to Ning, key authors of
the article, "Room-temperature Continuous-wave Lasing from Monolayer
Molybdenum Ditelluride Integrated with a Silicon Nanobeam Cavity," include
Yongzhuo Li, Jianxing Zhang, Dandan Huang from Tsinghua University.
Ning said pivotal to the new
development is use of materials that can be laid down in single layers and
efficiently amplify light (lasing action). Single layer nanolasers have been
developed before, but they all had to be cooled to low temperatures using a
cryogen like liquid nitrogen or liquid helium. Being able to operate at room
temperatures (~77 F) opens up many possibilities for uses of these new
lasers," Ning said.
The joint ASU-Tsinghua research team
used a monolayer of molybdenum ditelluride integrated with a silicon nanobeam
cavity for their device. By combining molybdenum ditelluride with silicon,
which is the bedrock in semiconductor manufacturing and one of the best
waveguide materials, the researchers were able to achieve lasing action without
cooling, Ning said.
A laser needs two key pieces – a
gain medium that produces and amplifies photons, and a cavity that confines or
traps photons. While such materials choices are easy for large lasers, they
become more difficult at nanometer scales for nanolasers. Nanolasers are
smaller than 100th of the thickness of the human hair and are expected to play
important roles in future computer chips and a variety of light detection and
sensing devices.
The choice of two-dimensional
materials and the silicon waveguide enabled the researchers to
achieve room temperature operation. Excitons in molybdenum telluride emit in a
wavelength that is transparent to silicon, making silicon possible as a waveguide
or cavity material. Precise fabrication of the nanobeam cavity with an array of
holes etched and the integration of two-dimensional monolayer materials was
also key to the project. Excitons in such monolayer materials are 100 times
stronger than those in conventional semiconductors, allowing efficient light
emission at room temperature.
Because silicon is already used in
electronics, especially in computer chips, its use in this application is
significant in future applications.
"A laser technology that can
also be made on Silicon has been a dream for researchers for decades,"
said Ning. "This technology will eventually allow people to put both
electronics and photonics on the same silicon platform, greatly simplifying
manufacture."
Silicon does not emit light
efficiently and therefore must be combined with other light emitting materials.
Currently, other semiconductors are used, such as Indium phosphide or Indium
Garlium Arsenide which are hundreds of times thicker, to bond with silicon for
such applications.
The new monolayer materials combined
with Silicon eliminate challenges encountered when combining with thicker,
dissimilar materials.
And, because this non-silicon material is only a single layer thick, it
is flexible and less likely to crack under stress, according to Ning.
Looking forward, the team is working on powering
their laser with electrical voltage to make the system more compact and easy to
use, especially for its intended use on computer chips.
EmoticonEmoticon